Replacement Air Wipes
Air Wipes
Bow Guides
Eyelet Guides
Nozzle Guides
Pulleys
Ring Guides
Rods
Roller Guides
Snail Guides
Tube Guides
U- Guides
Welding Butts
Surface Finish
Glossary
Inquiry Forms
Materials
Site Map
AW 5 for Niehoff sectioned view AW 15 for Samp AW 25 for Sictra
sectioned view
We offer replacements for your existing air wipes in Niehoff, Samp, or Sictra multi-wire drawing lines, shown above.
AW 5 for Niehoff
To replace the Alumina flanged eyelets used in Niehoff multi-wire drawing lines, COSMOS developed air wipe AW 5 in diamond polished Ruby/Sapphire, which not only results in minimal friction but also, when compared with its Alumina counterpart, offers a service life of at least 5 times as long. Indeed, most customers reported a service life of 10 times.
The Ruby/Sapphire is inlaid in a brass shell, electroless nickel plated to impart wear-resistance and lubricity. For easy identification the shell bears a laser mark of the bore diameter. Listed below are the available Ruby/Sapphire bore diameters with the corresponding part number and recommended wire diameter:
Air Wipe AW 5 is available only as pairs, inlaid with either Ruby or Sapphire wire guides.
AW 15 for Samp
COSMOS AW 15 for replacing air wipe blocks in Samp multi-wire drawing lines is made of 99% Alumina, precision ground then diamond-slotted. All wire slots are diamond polished. Listed below are the available slot widths next to the corresponding part numbers:
The width of the slot is laser marked on one side of the air wipe.
AW 25 for Sictra
COSMOS AW 25 for replacing air wipe in Sictra multi-wire drawing lines are fabricated in diamond polished tungsten carbide, inlaid in a brass shell, electroless nickel plated to impart hardness and lubricity. Listed below are the available bore widths next to the corresponding part number:
The bore diameter is laser marked on the shell of the air wipe.
An Inquiry Form is available for your convenience.